766 found, showing page 1 of 20
$6.99
4x3 HUB&HUB COUPLING ABS
4x3 HUB&HUB COUPLING ABS
View Details
$799.00
PWS 12.75"-14.38"x12" BODY CPL
PWS 12.75"-14.38"x12" BODY CPL
View Details
$17.99
4x4 CORRUG-PVC CONNECTOR
Provides a quick connection between 4" corrugated pipe and 4" PVC DWV pipe. Constructed of flexible, durable PVC.
View Details
$3.89
*1/4 FIP YLW BRASS CAP
F.I.P. (Female iron pipe) thread yellow brass pipe cap. Machined part made from extruded brass rod. Rated at 1000 psi (pounds per square Inch) up to 250 F (degree Fahrenheit). Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$4.99
1/2X1/4 HEX BUSH BRASS
M.I.P. (Male iron pipe) x F.I.P. (Female iron pipe) thread yellow brass hex bushing. Machined part made from extruded brass rod. Rated at 1000 psi (pounds per square Inch) up to 250 F (degree Fahrenheit). Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$9.99
1/2" ANGLE SWEAT VALVE
Chrome-plated brass. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$9.39
*1/2FIPX1/2" SHARK ELBOW
Push Fit x FPT (Female Pipe Thread) Elbow. Fast, trouble-free installation of Copper, CPVC and PEX tubing. Removable and reusable. Full flow design. Integrated brass seal gland. Replaceable O-ring design. Maximum pressure 200 psi (pounds per square inch). Maximum temperature 200 F (degree Fahrenheit). Approved for: Wet or dry installation. Residential and commercial plumbing. Plumbing, heating, irrigation, behind the wall (no access), renovation and repairs, and hydronic heating.
View Details
$12.99
1/2X3/8OD SHRK ANG VALV
Chrome-plated brass angle stop valve. The fitting can be used with copper, CTS (copper tube size), PEX (cross-linked polyethylene), and CPVC (chlorinated polyvinyl chloride) and is rated at 200 F (degree Fahrenheit), 200 psi (pounds per square in). it is made of 1-piece DZR (dezincification-resistant) brass. Fittings can be buried and placed behind drywall. Fittings are removable and reusable. Product is individually bagged. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$3.19
1/4" HEX HD BRAS PLUG LF
Yellow brass hex head plug, 1-piece construction. Use with brass or steel pipe. All pipe threads are American Standard Taper Pipe Threads. Fair vibration resistance. Used in low to medium pressure applications. PTFE (polytetrafluoroethylene) tape or pipe sealant is recommended. Rated at 1000 psi (pounds per square Inch) up to 250 F (degree Fahrenheit). Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$7.29
3/8X3/8 OD Q/C COUPLING
OD tubing size for hot and cold water applications in exposed locations only. Can be used with copper, CPVC, PEX, and polyethylene tubing. 1 per bag.
View Details
$3.59
3/8" HEX HD BRAS PLUG LF
Yellow brass hex head plug, 1-piece construction. Use with brass or steel pipe. All pipe threads are American Standard Taper Pipe Threads. Fair vibration resistance. Used in low to medium pressure applications. PTFE (polytetrafluoroethylene) tape or pipe sealant is recommended. Rated at 1000 psi (pounds per square Inch) up to 250 F (degree Fahrenheit). Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$6.39
2" FLUSH ABS PLUG
Counter sink plug used to form a removable flush closure. This threaded plug offers a corrosion proof alternative to a metal plug.
View Details
$6.99
3" FLUSH ABS PLUG
Counter sink plug used to form a removable flush closure. This threaded plug offers a corrosion proof alternative to a metal plug.
View Details
$10.49
4" FLUSH ABS PLUG
Counter sink plug used to form a removable flush closure. This threaded plug offers a corrosion proof alternative to a metal plug.
View Details
$9.99
1/2PT CLR PVC PRIMER
Clear Primer, NSF listed (National Sanitation Foundation). Clear aggressive primer used on PVC (polyvinyl chloride) and CPVC (chlorinated polyvinyl chloride) pipe and fittings. Low VOC (volital organic compound) solvent cement. Removes surface dirt, grease, and grime as well as softens the pipe surface to allow a fast, secure solvent weld. NSF listed meets ASTM (American Society for Testing and Materials) F656.
View Details
$8.49
3/4"CX3/4"F 90 ELBOW
Low lead cast brass solder joint fittings, adapter elbow. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$17.49
3/4" 90 SWT DROP ELBOW**********
Low lead cast brass solder joint fitting, 90 degree drip ear elbow. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$7.19
7129T 1/4 HOSE BARB TEE
Full union brass hose barb tee. Packed 10 per bag and individually flag tagged for scanning. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$7.29
7129T 3/8 HOSE BARB TEE
Full union brass hose barb tee. Packed 10 per bag and individually flag tagged for scanning. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$6.99
*5/8X 1/2 REDUCING NUT
Low lead flare reducing nut. 5 per bag. Individually flag tagged. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$4.99
*1/2 X 1/4 RED FLARE UNION
Low lead reducing flare union. Machined from brass rod. 5 per bag. Individually flag tagged. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$5.99
*5/8x3/8 RED FLARE UNION
Low lead reducing flare union. Machined from brass rod. 5 per bag. Individually flag tagged. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$5.99
*1/2 X 1/4 FE COUP
OD (outside diameter) tube x Female IPS (iron pipe size). Individualy hang tagged. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$13.99
*3/8 X 3/4 ELBOW
OD tube x Female iron pipe. Sold in bags and individually flag tagged. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$21.49
*3/4 COMPRESSION UNION
OD (outside diameter) tube size. Sold in bags and individually hang tagged. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$27.99
1-1/4" FLEX LAV POPUP
Will work with any plastic, chrome, or brass system. 1-1/4" and will extend from 5-1/4" to 8-3/4". Chrome-plated.
View Details
$1.89
NIPPLE PVC S80 1 X 4
May be used in a great variety of applications for transport of water and other liquids. Pipe thread compound or sealing tape should be applied to threaded portion of nipple. Nipples are IPS (iron pipe size) and threaded to NPT (National Pipe Thread) pipe threads and meet ASTM (American Society for Testing and Materials) specifications D1785.
View Details
$15.49
*FLEXIBLE REPAIR ELBOW
Quick ELL lets you make 90 deg. connections of all common household drain, waste, and vent pipes without using special tools or fittings. Exceptionally flexible and extra long neoprene rubber. It is an ideal replacement for repairs. Do not use in pressure applications. Used for repair or alteration of drain, waster, or vent pipe and fittings. Fits cast-iron, steel, plastic, lead, and copper pipe. Especially suited for in-wall or other limited space connections. Extra length allows easy replacement of elbows or tees cut out at joint. For use with DWV systems.
View Details
$13.99
1/2 FIPx3/8 OD CMP ANG
BrassCraft FIP Inlet x O.D. Compression Outlet 1/4-Turn Angle Valve controls the water flow to household plumbing fixtures - faucets, toilets, dishwashers, icemakers, washing machines, etc. The angle valve is most often used where the water pipe enters the room from the wall. With a 90 Deg. turn of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home. One-piece shut-off mechanism ensures smooth operation without freeze-ups, even after long periods without use. Easy-to-remove handle protects against accidental operation during rough-ins. Compatible with iron pipe, no-lead certified.
View Details
$12.49
2" FLEXIBLE REPAIR ELBOW
Quick ELL lets you make 90 deg. connections of all common household drain, waste, and vent pipes without using special tools or fittings. Exceptionally flexible and extra long neoprene rubber. It is an ideal replacement for repairs. Do not use in pressure applications. Used for repair or alteration of drain, waster, or vent pipe and fittings. Fits cast-iron, steel, plastic, lead, and copper pipe. Especially suited for in-wall or other limited space connections. Extra length allows easy replacement of elbows or tees cut out at joint. For use with DWV systems.
View Details
$10.49
16" CLICKSEAL FAUCET CON
Fluidmaster faucet water supply connectors are built to last. Made of a tough polymer core covered with braided stainless steel wire. These connectors exceed code requirements for durability. They also have a large inside diameter for higher flow capacity. The "Click" lets you know it's sealed. Click Seal faucet connectors provide a guaranteed "no leak seal" and eliminate cross threading and stripping. No tools required for installation. 5 year warranty.
View Details
$10.99
20" CLICKSEAL FAUCET CON
Fluidmaster faucet water supply connectors are built to last. Made of a tough polymer core covered with braided stainless steel wire. These connectors exceed code requirements for durability. They also have a large inside diameter for higher flow capacity. The "Click" lets you know it's sealed. Click Seal faucet connectors provide a guaranteed "no leak seal" and eliminate cross threading and stripping. No tools required for installation. 5 year warranty.
View Details
$24.99
PT ORANGE LAVA CPVC CMNT
Heavy-bodied orange cement. 1-step, fast curing cement designed for cut-in applications where limited time is available for down-time. Used on all schedules and classes of CPVC (Chlorinated Polyvinyl Chloride) pipe and fittings up to 6" diameter with interference fit. For Commercial hot and cold water systems up to 200 F (Fahrenheit)/93 C (Celsious) with recommended application temperature 40 F to 110 F/4 C to to 43 C. Low VOC (Volital Organic Compound). Meets ASTM (American Society for Testing and Materials) D2486.
View Details
$21.49
32OZ ABS CEMENT
Extra Special Medium Black ABS Solvent Cement is recommended for solvent welding non-pressure ABS pipe and fittings up to 6" with interference fit. ABS Solvent Cement is formulated for hot, arid climates. Can be used for sewer and drain, waste and vent systems. Product is compliant with SCAQMD (South Coast Air Quality Management District) Rule 1168 and OTC (Ozone Transport Commission) regulations for Volatile Organic Compound emission levels. Product is NOT for use in a system using or being tested by compressed air or gases.
View Details
$33.99
6 CP BR PO PLUG W/GRID
Chrome-plated 1-piece cast brass with grid strainer drain for lavatory.
View Details
$5.29
FLUSHOMETER HANDLE KIT
Flush handle kit, seal and spud. Sloan OEM (Original Equipment Manufacturer) #5302305.
View Details
$11.49
1-1/2" FLEX REPAIR ELBOW
Quick ELL lets you make 90 deg. connections of all common household drain, waste, and vent pipes without using special tools or fittings. Exceptionally flexible and extra long neoprene rubber. It is an ideal replacement for repairs. Do not use in pressure applications. Used for repair or alteration of drain, waster, or vent pipe and fittings. Fits cast-iron, steel, plastic, lead, and copper pipe. Especially suited for in-wall or other limited space connections. Extra length allows easy replacement of elbows or tees cut out at joint. For use with DWV systems.
View Details
$6.19
1-1/2" DRAIN CONNECTOR
Fernco tubular drain pipe connectors offer a quick and easy way to extend, alter, or repair any combination of 1-1/2" or 1-1/4" brass or plastic drain pipe. Whether you're connecting brass to brass, plastic to plastic, or brass to plastic, you get an economical, leak-free seal. Installation is fast and simple. Made of flexible PVC.
View Details
$8.29
3/8x7/8x16 SS BRAID FLEX
Toilet connector, high pressure braided stainless steel flex line, tested to 1800 lbs (pounds). Brass inserts, chrome plated brass nuts, IPS x Ballcock x length. Use to connect most toilets to water source.
View Details
$11.99
*1-1/2" FLEX REPAIR TEE
For drain, waste, and vent use only. Do not use in pressure applications. Flexible neoprene rubber allows variety of take-off angles. Used for repair or alteration of drain, waster, or vent pipe and fittings. Fits cast-iron, steel, plastic, lead, and copper pipe. Especially suited for in-wall or other limited space connections. Extra length allows easy replacement of elbows or tees cut out at joint.
View Details
